How to Repair a Scratch on Your Goggles

If you have a scratch on the plastic lens of your goggles, you can easily remove the scratch by using a glass etching cream. Glass etching creams use hydrofluoric acid to remove the outer layer of plastic and buff away the scratch. While these techniques can save your life, it should be noted that you should only use them if you are sure that they are safe for you to use.

Baking Soda

To fix your scratched goggles, you can use a paste of baking soda and water. This paste is very effective at removing scratches, as it has a low abrasive rating. To apply the paste, simply dip a cotton ball in the paste and rub it into the scratch with a circular motion for about 10 seconds. After applying the paste, rinse the scratch with cool water. Repeat the process as often as needed until the scratch is gone.

To use this paste, you need to make sure you have a lens cleaner and a microfiber cloth handy. Mix the baking soda with water until it forms a thick paste. Rub the mixture onto the scratch using the microfiber cloth gently, making sure not to apply too much pressure, otherwise you may cause smudges on the lens. Alternatively, you can also use toothpaste, but make sure you use a non-gel formula as toothpaste can cause small abrasions on the lens.

While baking soda works well at removing scratches on glasses, it is not recommended for larger scratches. To repair larger scratches, you should apply a wax-based repair product. These products are usually available at drugstores and other retail outlets. These products are not as effective as baking soda, and you will have to apply them repeatedly to get the desired effect.

Brass Polish

If you have a scratch on your goggles, you can try using a brass polish to remove it. This is particularly useful for scratches on lenses that are not very deep. It also works well to remove debris that might have stuck to the lenses. It is important that you use an acetone-free brass polish for this.

Alternatively, you can use a car wax. This is great for shallow scratches and can be removed easily with a microfiber cloth and water. Make sure not to use too much as it can harm the lenses and cause eye strain. Another alternative is rubbing alcohol. It can also be used to treat scratches on lenses and frames.

You can also try a low-abrasive metal polish to remove scratches from lenses. However, it is important to be patient with this procedure. The polish will take a while to work, so be patient and take your time. Once you have done so, you can use a cotton bud to wipe off the scratches and the lens with rubbing alcohol. You can also apply a layer of car wax over the scratch to smooth it out.

Glass Etching Cream

You can use glass etching cream to repair a scratch or other damage on your goggles. You can apply the cream using a cotton swab or a Q-tip and make sure to cover the entire surface of the lens. You can also use rubbing alcohol to soften the coating on the glass lenses.

The first step is to clean the lenses of the goggles and then apply the etching cream. Be careful not to over apply the cream, as the acid in the product can burn off the protective coating. After allowing the solution to sit for 5 minutes, wipe the lenses with a microfiber cloth. You can repeat the process as many times as needed to get the best results.

Another way to clean glasses is to scratch them with toothpaste or window cleaner. However, you should not use abrasive products on the lenses, as they could cause a serious skin burn. Some articles recommend using wax to fill in scratches, but wax-based products will often result in hard-to-remove smudges on the lenses, which will lead to further scratching.

Vinegar

Vinegar is a versatile cleaning agent that can be used to repair scratches on safety goggles. It can be found in any household and can be mixed with baking soda to make a solution. After the mixture has cooled, apply it to the affected area with a soft cloth. Then, gently buff in the vinegar mixture to the scratch.

If vinegar does not remove the scratch, you can use a baking soda and water solution to remove it. Use a soft cloth or a cotton ball to apply the paste to the scratched surface and then rinse with cold water. If this does not work, you can also use toothpaste, which contains ingredients that smooth out marks and minimize scratches. You should choose a non-abrasive and non-gel toothpaste to avoid scratching your lenses.

Another way to remove a scratch on your goggles is to clean them with a solution of white vinegar and water. After cleaning them, you can use the solution to polish them. This solution can help cover up minor scratches, but it's not recommended to use it on a deep scratch.